Machine Dimensions	Footprint	126" x 90"	(3.2 m x 2.3 m)
	Weight (tank empty)	8000 lb	(3629 kg)
	Height	70"
	Operating Weight (with water in tank)	22,000 lb
Work Envelope	X-Y Travel **	100" x 55"	(2.5 m x 1.4 m)
	Table size	126" x 65"	(3.2 m x 1.6 m)
Computer Control System	Hardware	Personal computer	Can read and interpret all drawing file types
Controller System	Control software	Integrated CAD/CAM system directly uses DXF files
		Able to convert most any file type	Draw it, fax it, we'll cut it.
Drive Description	Closed loop, digital drives
	Brushless servo motors
	Pre-loaded ball screws, re-circulating balls
	Linear bearings with hardened, precision ground ways
	Cantilever Y axis on bridge X axis
Accuracy of Motion at 70 degrees F	Over entire travel	±0.005"	(0.127 mm)
	Over 1 foot travel	±0.002"	(0.051 mm)
	Repeatability	±0.002"	(0.051 mm)
	Squareness	0.002" per ft	(0.17 mm/m)
	Straightness	0.003" per ft	(0.25 mm/m)
	Backlash	0.0007" max	(0.018 mm)
(Specifications per National Machine Tool Builders Association standard)
Speed	200 inches per minute standard (5.1 m/min) (speed can be increased if desired)
Power Required	440-500 VAC, 60 Hz / 3 Phase (Standard)
Pump	40 horsepower, 55,000 psi
Noise Level	Below 80 dBA for submerged cutting